SpeTool Insert Corner Round 1/4" R 1-1/16" Dia 1/4" Shank Router Bit

SpeTool W09002 Insert Corner Round 1/4" Radius x 1-1/16" Dia x 5/8" CH x 1/4" Shank x 2-3/8” Overall Length Router Bit

SpeTool Router Bits New Customer Discount

Sign Up To Get 12% Off For Your First Order!

$35.29 USD

Shipping calculated at checkout

Only 10 left!

BUY 2 SAVE 10%
Discount applied in your shopping cart
For bulk requirements please click here!

USA, Canada, UK, Germany orders ship from local Amazon warehouses with Amazon's speed; others from China.

Description Downloads CA PROP 65 WARNING
  • SIZE SPECS: 1/4” Radius, 1-1/16” Overall Dia., 5/8" Carbide Height,2 Cutters, 1/4 inch Shank dia., 2-3/8” overall length.
  • MATERIALS FIT: dealing with wood materials like plywood, MDF, particle board, hardwoods, and softwoods.
  • APPLICATION: moldings, doors, drawers, board, and plaques, and "soften" sharp edges of any wooden parts
  • ALTERNATIVE CARBIDE CUTTER: Cutting is more stable and fast due to the welded solid carbide cutter tip on the bit. Blade Alternative, router bit body long life using.
  • MACHINES FIT: Premium Carbide Blade + high-quality steel bit body, suit for CNC and other automatic routers, hand-held, table-mounted portable routers also.

DOWNLOAD CNC SPEED/FEED FILE OR CHECK THE PAGE FEED & SPEED.

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and  always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. SpeTool Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
of any product (including sharpening).  

WARNING: Re-grinding of SpeTool products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.  

WARNING: SpeTool products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.  

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a ubstance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.

Autodesk fusion 360 logo
Spetool tool file database vectric
SpeTool-carevco-tool-database

CNC Software.tool Files Available

Fusion 360™, Vectric® & Carveco® CNC Tool File For Download, click here!

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Marty Schlein
1/4’ radius insert tooling router bit a HIT!

The SpeTool W09002 1/4” Radius Corner Round Router Bit is all one could ask for in this size bit. It arrived in a Paper Packaging pouch which is recyclable No Plastic to add to the landfill is most appreciated.the storage container was robust and well protective if you are traveling to a work site. Included was the T2 wrench to change the insert tooling the bearing had plenty of lubricant and was smooth as silk. i measured the bit with a digital dial indicator Shank .249 Carbide Thickness .062 Shank Length 1.130 Bearing Diameter .500
I used the bit for a few runs on Solid hard Maple and no chatter marks and dropped the bit to produce a Filet on top of the radius and it performed flawlessly. The chips were large and clean I used this bit in an old Stanley Router which is at least 40-50 years old and was a clean cut out of the box I have other newer routers and I am sure that the bit will perform well in those as well. I have used carbide tooling for a good portion of my 48 year career and to be able to change the tooling will be a bonus and most likely be less money than sending it out for sharpening, overall i think this is a terrific tool to add the the quiver.

User picture User picture User picture User picture User picture
K
Kimani Van Strayhorn
Smooth cut on the hardwoods

I mostly use hardwoods so I tested this bit out on a piece of Sapele. It cut super smooth and left a great finish on the piece. I have a bench project that I’ll be using it on next.

User picture