SpeTool W06013 Solid Carbide 3-flute V Groove 90 Deg 3/8" Dia x 1/4" Shank x 2" Long Router Bit

SpeTool Router Bits New Customer Discount

$39.19 USD

Shipping calculated at checkout

Only 11 left!

BUY 2 SAVE 10%
Discount applied in your shopping cart

For bulk requirements please click here!

USA, Canada, UK, Germany orders ship from local Amazon warehouses with Amazon's speed; others from China.

Specification: 

Flute number

3

Shank Diameter(SD)

1/4"

Cutting Diameter(CD)

3/8"

Overall Length(OVL)

2”

Cutting Degree

90°

Material Carbide

 

Overview: 

The SpeTool solid carbide 3-flute V groove router bit is designed for smooth, precise cuts of materials such as wood, plastic composites, and non-ferrous metals.

Featuring a cutting diameter of 3/8", a 1/4" shank, a 90-degree angle, and a 2" overall length, this precision-crafted router bit will tackle even the toughest jobs.

ZrN coating can extend tool life by 3 times at proper feed and speed. 
 

Designed for cutting the following materials:

 

  • Plastics
  • Plywood
  • Composites
  • Hardwood
  • Softwood
  • MDF/HDF
  • Acrylic
  • Laminate

 


DOWNLOAD CNC SPEED/FEED FILE OR CHECK THE PAGE FEED & SPEED.

Safety Guidelines

BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and  always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. SpeTool Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
of any product (including sharpening).  

WARNING: Re-grinding of SpeTool products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.  

WARNING: SpeTool products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.  

WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a ubstance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.

SpeTool V Groove router bits

SpeTool V Groove Bit

More for engraving letters, signs, engravings, etc. on wood.

Industrial Quality

Made of premium YG-G carbide ,with high hardess and good wear resistance, sharp edge ensure smooth cutting.
SpeTool V Groove router bits
SpeTool V Groove Bits

V Bit Design

One Piece cutter design make cutting more stable and fast ,Thick blade will provide a long cutting life

Excellent for Detail Work

V-groove bit is a great alternative to a small diameter straight cutter in engraving very fine detail
SpeTool V Groove Bits
Autodesk fusion 360 logo
Spetool tool file database vectric
SpeTool-carevco-tool-database

CNC Software.tool Files Available

Fusion 360™, Vectric® & Carveco® CNC Tool File For Download, click here!

Customer Reviews

Based on 1 review
0%
(0)
100%
(1)
0%
(0)
0%
(0)
0%
(0)
N
Nick
Good Overall V-Bit for Hardwood and Not Bad for Plywood

I got this bit as it looked very similar to one that cadence manufacturing has made and was curious if the downcut nature of the v-bit would provide a much cleaner cut than the traditional upcut. I tested this with 1/2 in plywood and a piece of hard maple. Each carve took roughly 5 minutes to perform the feeds and speeds I used were the same as the feeds and speeds for the upcut 90 degree vbit of the same size. I believe it was 72 ipm feedrate 44 ipm step down speed, The stepdown was .1875 and the stepover was 6 percent I believe. When running the plywood everything was really smooth with no issues overall. There were still a few fibers leftover after the cuts, but less than I typically get with the upcut version. When cutting into the hard maple there was quite a bit of chatter at those feeds and speeds when going against the grain on the curves and when going deeper in the cut. When cutting with the grain it seemed to be much smoother. There may have also been a little bit of deflection because I did notice some ridges when the step downs occurred which can be seen in the pictures in the hard maple. They were less noticeable in the plywood. I think this could be attributed to me needing to fine tune the feeds and speeds though.

The reason I am deducting one star from my review is because it wasn't available in the carveco tool database so I had to create a new tool and configure my own feeds and speeds from the start. Also the ridges when stepping down were not ideal, but if I were to rerun the v-carve exactly the same, there is a good chance it would have cleaned all of that up. The bit was not hot after running for roughly 5 minutes back to back at those feeds and speeds so I am probably close at least.

Lastly, I appreciate that all of spetools bits come in a plastic case with a sticker that says which bit it is and which number it is as well, so when finding it in the tool database it is easy to identify.