SpeTool EU S01001 Router Sled & S01002 Dust Collection Shroud & W05008 Surfacing Bit & O01001 Blades Bundle Set

Sono soddisfatto delle prestazioni del prodotto
che avrei considerato ottimo se avesse montato delle spazzole per tenere pulite le ruote nel loro percorso grazie comunque

The SpeTool S01001 Pro is exactly as it is described on the website. I just received mine before the holidays and I can't say enough about it. Straight outta the box setup time was easy and fast. I was flattening down the cutting boards that are on the large size 24"X 20"X 2". The boards are comprised of 20 individual strips glued together 2" plus ,thick. even with being careful in the glue up the supplied strips of 3/4"X 24" each ,I still had the one side that showed all the varying widths to trim down to even and level.the SpeTool Pro was the only choice to have for the job!

I had previously been doing all my slab flattening on a home made sled. It worked ok and it got the job done, but it had many limitations, some of which I didn't even realize until I started using the SpeTool sled. The first issue was that it had too much flex in the wood rails and would sag when I tried flatting slabs larger than about 20" wide. The second issue was the mess it made in the shop. It was actually so bad that I would have to use it outside. The biggest draw back however, wasn't realized until I started using the SpeTool sled. With the SpeTool sled I was able to work the router with the grain down the long side of the Slab This was something that I couldn't really do with my homemade sled. Working with the grain produces a smoother surface and is less work in my opinion. Then when you add in the dust collection, I was able to work in my shop again. Now I am not going to say you won't need to vacuum when you are done, but the mess is drastically less than with no dust collection. Also, the aluminum rails are much stiffer than my wood ones and don't flex nearly as much over larger spans. I would absolutely put this kit at the top of my list if I was setting a small garage shop up for slab flattening.
Rob @ RM Woodcraft llc

This is an investment! That being said, if you only doing one slab, I would recommend DIY build or having someone professionally flatten your project. I would hazard a guess that you would be saving for a fifth of the cost of this rig. I bought the dust shield with vacuum hose attachment and was disappointed on a few levels. Firstly, it's a gimmick that falls short of its intended purpose and although it may cut down a little of the waste being scattered in the shop, it does not work as advertised. Do your slab flattening outside or you'llbe vacuuming for days. Secondly the hose port fit is not standard for any shop vac, so you'll be needing some type of adapter. As for the router sled itself, the build is sturdy, and it does work as intended. However there is the minimal clearance issue. Even at its lowest setting, I still had to raise the work piece as the plunge depth of routers are limited. Also expect to clear debris (constantly) from wheel path as it collects and will hinder the smoorh and level tracking of the wheels Overall, it works. But I'm thinking I should have opted for the bearing rail system. I gave it 3 stars because that's where it falls in the overall rating. Average! These are my opinions from my experience. Your millage may vary. If I could send it back without the hassle. I probably would. I don't have the box, and the return policy says everything has to be in original unused condition, which is impossible after use.

This SpeTool router sled is huge. It's not hard to assemble, but the instructions leave a lot to be desired. They provide lots of extra parts, including an assortment of screws to mount your router. The pre-drilled holes in the plate you mount your router to didn't fit my Bosch plunge router, buy It's easy enough to drill a few how's in the plexiglas mounting plate. It seems well built and sturdy. I would recommend this router sled, especially if you have large slabs to flatten.