I don't purchase a lot of product at any one time, but SpeTool ships my order and provides excellent service reguardless. I will continue to purchase from SpeTool. Many thanks.

Love it! Has made life easier in the shop. Really easy to put together as well.

I am very impressed with your product. It works as advertised. You still need to not be in a hurry and check all the wood before clamping. I have used all I bought and will continue to do so. Before clamping the wood down the wood make sure it is where you want it and check as you tighten the clamp that it stays level. If you do that it will come out wonderfully. It is possible to eliminate the clamps used to keep everything flat if done properly.

Well made - was hesitant on the price yeah my first set I was sold on it. Money well spent.

If you haven't used a track saw square, it's an indispensable accessory that lets you do quick, precise 90 degree cuts across the material by aligning the track with its side. As a Vine reviewer I've had the opportunity to try and review several track saw squares with my Milwaukee saw, and what sets this apart is its size--it provides a more substantial foothold on the workpiece than the compact squares I've used in the past. That aids with both precision and ease of use.

Tracksaw squares come in two main types, fixed and with an adjustable angle. This combines some of the advantages of both, since it has individual holes for precise angle setup. The tradeoff there is that you're limited to the preset angles, but I think for most purposes, that's probably a better compromise.

I tried putting it against a fixed square and the 90 degree angle was spot on.

Finally, the cost. This isn't cheap. You can get a decent smaller square for less. I'd say that the price differential is justified in terms of what you get, namely, a much more substantial tool that is easier to use and more precise -- but if you don't think you'll be using your track saw often, you should be aware that there are less expensive alternatives that work pretty well.

These clamps are a game changer. I’ve been building cutting boards with them and it has cut my glue up time in half! They make it really easy to square up the ends of the wood and they apply pressure equally front to back and top to bottom. I liked the first set so much, I ordered a second set!! Best money on tools that I’ve spent in a long time…

I've become a big fan of SpeTool products, and this adjustable angle track saw square is another great example of why. Every SpeTool product I've owned has been excellent quality, well designed, and simply works the way it's supposed to. This one continues that tradition. The thick aluminum construction gives it a substantial, heavy-duty feel, and the overall design reflects the attention to quality I've come to expect from SpeTool. The nine preset angle stops, ranging from 0° to 60° in 7.5° increments, make setting up repeatable cuts straightforward without constantly measuring and adjusting angles. I especially appreciate the quick-lock mechanism and non-marring design that protects the guide rail from scratches. The larger size provides a generous reference surface for positioning the track against the workpiece, while the adjustable edge support is another thoughtful feature. The one limitation worth mentioning is that you're restricted to the nine preset angles rather than being able to select any arbitrary angle. At $151, this is definitely a premium-priced accessory, but the solid construction, thoughtful engineering, and convenience make it a good value for serious woodworking. SpeTool continues to impress me with the quality of its products. Another excellent addition to my workshop!

The build quality on this one stands out right away. The aluminum body has a solid, substantial feel to it, definitely not something that feels like it will warp or loosen up after a few uses. This feels like the kind of tool that will hold up well over years of use rather than something you will need to replace after a season or two of projects.

The preset angle stops are a small detail that make a big difference in actual use. Each one clicks satisfyingly into place, so you get a clear tactile and audible confirmation that you have landed on the exact angle rather than second guessing whether it has shifted slightly. It takes a lot of the guesswork out of angle cuts and speeds up setup since there is no need to measure and adjust every time.

I run a Wen track saw and this square fit onto the rail without any issues, so compatibility was a non factor for me. Setup was quick and it locked in securely without marking up the rail.

SpeTool has created a highly accurate and functional miter gauge for track saws. It has precision stops for common angles.

I really appreciate how easily this attaches to track rails. I tried Makita and Festool tracks, and it fits perfectly. It inovative clamp doesn't scratch or mark the rails. It also stays out of the way of the top of the rails. I have other jigs like the router base that slide on the track saw rails, and other angle squares have a clamp on top that the router base will hit. This SpeTool keeps the whole angle square out of the way of other track accessories. Very clever design.

It is an instant and reliable attachment to the rails. It holds solid. There is a special lip on the gauge that keeps it level with the top of the wood being cut. This lip piece can be moved closer to the rail if narrow pieces are being cut.

The thickness is about 1". I normally use foam boards or bench cookies under the wood I cutting to allow for the blade to extend below the bottom surface of the wood. The depth of this gauge did not interfere with anything I cut.

Just a couple of minor issues:
It doesn't have a way to lock it in between the hole stops milled into it. I can't set an angle just a little larger or smaller than a preset one.

It also has an issue releasing the clamp from the rail when it's set to, say, 45 degrees. The angle stop gets in the way of the clamp handle so it will not loosen. This one isn't a big issue, but I did run into it.

Now on a decorative note, I love the orange anodized finish that SpeTool applies to their tools; it is my favorite. For me, it is calming and pleasant. I can see across my shop and not lose track of the tools.

This angle square is a little expensive, but it is perfectly square at 90 degrees. Then it has numerous other precise angles. It negates my need for a table saw and actually for using a miter saw in many situations. Carrying just this one angle square is about all I need.

As a professional cabinet installer, I use my Milwaukee and festool tracking saws everyday. I have Festool, Makita and Milwaukee tracks and the square fits them all. I love the time saved especially when making short miter cuts. I highly recommend this product.

hi Jess, received this router lift and installed it in my Bosch RA1181 router table. The quality and craftsmanship of this router lift is absolutely the best on the market.

Be prepared to pay a premium price, but I want to stress that it is worth every penny. I installed the United States lift with ease, and anyone with the slightest mechanical skill can do it also. If you are a woodworker or hobbies, be assured that you will not struggle with setting this up.SpeTools has put a lot of thought and engineering in this device. It is absolutely flat, but it did expose the very slight flaw on my Bosch router table.
I struggled at first with trying to use the leveling screws and set screws that came with the router table lift, but realized that the screws that is used to hold the table down has a different thread pitch from the stock screws that come with the OEM Bosch RA1181 table. You can either swap out all of the screws and nuts with the ones specifically sent with the router lift and everything works just fine. Adjustments on the table is a no-brainer. I especially like the way it is designed so that almost any router will fit this lift by simply opening up the retention clamps with the included wrench, installing the router, then tightening the clamps with the wrench. it literally took me a few seconds, not minutes, to install my Bosch router. I have not tried my Milwaukee hand router, but it appears that this will also fit flawlessly. The lift mechanism is absolutely silky smooth. I have yet to use my router table with the new lift installed, but from all observations, it is absolutely top notch.

Well made, perfect for my needs, strong, easy to use

Bought this for my track saw - really good quality, and very accurate. Not inexpensive, but you get what you pay for.