🔍 In terms of construction, not really – SpeTool’s “metal cutting” router bits are essentially carbide **end mills** (the same type you’d use in a milling machine). The main differences sometimes are in the shank compatibility (many of SpeTool’s bits are 1/4\" or 1/2\" shank to fit common router collets) and perhaps slightly different flute geometry to account for higher RPM. But a 1/8\" carbide end mill from SpeTool can be used in a CNC router or a CNC mill interchangeably. The key is that CNC routers typically run at very high RPM (10,000-24,000), so the bits they sell for metal often are single or two flute to perform well at those speeds without generating too much heat. Traditional milling with say a 4-flute in aluminum at 3000 RPM – you wouldn’t do that on a router, you’d likely pick a single or two flute at 18k RPM. So think of it this way: SpeTool gives you the same carbide end mill quality, but you select the type (flutes, coating) that suits the machine and material. Regular “end mills” and “router bits” can be the same things, just marketed to different audiences. SpeTool even labels some as end mills. So you can confidently use their end mills in any CNC – just match the shank size and cutting parameters.

Related product: → View product page