Made of premium carbide according to strict industrial grade quality standards with high wear resistance and has long service life to ensure best performance
H-Si Coating provide stability and heat resistance at extremely high temperatures, prevents further oxidation,increased the bit’s lifespan and durability substantially
Sharp Cutting Edge
Sharp edge ensure good cutting effect,clean surface,no burr for excellent cutting finishing
DOWNLOAD CNC SPEED/FEED FILE OR CHECK THE PAGE FEED & SPEED.
If you are unsatisfied for any reason, within 30 days of receipt of your shipment, you may return any new or lightly used item for refund. Please refer to RETURN POLICY for the operation process.
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. SpeTool Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
of any product (including sharpening).
WARNING: Re-grinding of SpeTool products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: SpeTool products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a ubstance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.
CNC Software.tool Files Available
Fusion 360™, Vectric® & Carveco® CNC Tool File For Download, click here!
Customers Also Liked
I use this bit to carve the finishing toolpath when running 3D relief files. The amount of detail is outstanding.
The precision is highly accurate and the sharp edges are holding up very well.
Customer service is top quality.
This is a great tool bit. I used for grinding off 3 steel wheel studs and lug nuts on two Jeep wheels where the lug nuts were rusted solidly in place. The bit also allowed me to easily mark the center of the wheels studs so that I could drill much of the stud away before finishing cutting through the stud and the lug nut. I was able to remove the frozen studs and lug nuts without wrecking the alloy wheels. The alternative would have been to use a cutting torch, ruining the wheels. It cuts well, and is not easily broken.
I have this one and their other end mills (different radii) it does everything I need it to do and I push it pretty hard. I own a Shapeoko and run this bit at around 160-200IPM for hours at the time.
Just as good as the expensive ones. This was my 2nd purchase. Used daily and sharpness last.
Bit works great. Used it for CNC 3D carving.