I joined the ranks of home CNC users a couple of months ago. Huge learning curve, lots of daft mistakes but gained a lot of knowledge on the way.

I've learned that not all the received wisdom on the use of detail finishing router bits is correct - most favour the knife-type 30 degree bits, which I've used but have been disappointed with the quality of the end result. Tearout in mature stock like oak, pine and ply meant another manual process cleaning up crisp edges.

This tiny SpeTool 1/16" down-cut bit gave a very near perfect result - although obviously it took a little more machine time (slower feed rate obviously). But it added only 30 minutes on an already six hour roughing and detail finishing carve project - and saved me at least an hour on the manual edge cleaning.

I’m a huge fan of spiral carbide cutters ever since I upgraded the cutters for our planer and jointer. I’ve also been using a variety of @spetool_cnc bits for a while now (unsponsored 😉) and when I saw that SpeTool released this beast of a 5” long, 65mm (~ 2.6”) cutting height flush trim bit, what happened next is obvious. I made a video on my Instagram channel: (@themountainmakers) https://www.instagram.com/reel/CwppmCqLCOC

Excellent bit for fine detail engraving with my cnc.

Rotor bit work better than I imagined. I I need several other different bits I’ll be ordering them soon thanks a lot. J.

This is one of the best Flush Trim bits I have ever owned. The bit produces extremely smooth finishes on the different types of wood that I am working with. This Extra Tool Life Coated Solid Carbide Flush Trim Compression Spiral 1/4" Dia x 1/4" Shank x 1-1/8" Cutting Length x 3" Extra Long Router Bit holds up under all day use with little mercy from me. I know I am hard on my router bits because I have a time frame to produce, and this Flush Trim Compression Spiral bit from SpeTool meets my demands.

As a first time user of this type of bit I really don't have anything to compare to but what I can say is excellent excellent excellent I built a workbench for my small shop and I built the bench top Out of 2 by 4 material old 2 by 4 material I might add And not only were the boards different Sizes the weather turned off hot And caused a bad warp in the The Bench top because I had to keep it outside for a couple of daysAfter building a router sled I used the flattening bit to fix my benchtop and it came out perfectly Flat Daddy was very happyThe bit showed Up exactly when they said it would and was packaged very wellDefinitely worth the money and I would purchase again

I finally got the opportunity today to use my SpeTool Ranger Series W07020 Flush Trim Router Bit w/ Upper and Lower Bearings. (I had to finish building/installing my table saw - router table insert, seen in the video.) This thing is a MONSTER, in size and capability, and makes quick work of edge trimming my plaque templates. Definitely saves me a lot of time at the router table, which equates to money saved in the long run. It makes a very clean cut, as long as you are using it at the proper speed. (18,000 RPM recommended) I highly recommend this product.

The SpeTool W09002 1/4” Radius Corner Round Router Bit is all one could ask for in this size bit. It arrived in a Paper Packaging pouch which is recyclable No Plastic to add to the landfill is most appreciated.the storage container was robust and well protective if you are traveling to a work site. Included was the T2 wrench to change the insert tooling the bearing had plenty of lubricant and was smooth as silk. i measured the bit with a digital dial indicator Shank .249 Carbide Thickness .062 Shank Length 1.130 Bearing Diameter .500
I used the bit for a few runs on Solid hard Maple and no chatter marks and dropped the bit to produce a Filet on top of the radius and it performed flawlessly. The chips were large and clean I used this bit in an old Stanley Router which is at least 40-50 years old and was a clean cut out of the box I have other newer routers and I am sure that the bit will perform well in those as well. I have used carbide tooling for a good portion of my 48 year career and to be able to change the tooling will be a bonus and most likely be less money than sending it out for sharpening, overall i think this is a terrific tool to add the the quiver.

I’ve been using the 1/4” O Flute to cut 1/2” UHMW and it’s been nothing but prefect. I will definitely recommend these bits every time.

I mostly use hardwoods so I tested this bit out on a piece of Sapele. It cut super smooth and left a great finish on the piece. I have a bench project that I’ll be using it on next.

SpeTool is a new comer to the router bit and CNC industry and are battling names like Amana, Whiteside, Freud, etc. and I must say, they hold their weight! The packaging was great, fulfillment was great, for the part you’ve been waiting for, performance of the bit was exactly what I was expecting and what SpeTool claims. I did a couple of 1 hour carves on my OneFitity Journeyman with a 2.2KW water cooled spindle and it just chewed through the maple and oak I tested it with like it was sugar pine! I was doing some pretty aggressive cuts with some very aggressive feeds and speeds and it did not chatter or “whimper” at the challenge.

I am very happy that SpeTool put the extra effort in to populate the database for the popular CAD/CAM softwares out there such as the Vectric Ltd. product line. This is one of the reasons why I typically do not go for some of the other brands out there because it can be monotonous trying to sift through manufacturer’s websites to try to populate your own tool database within your preferred application.

I can say quality and use-wise, thus far, this bit is comparable with the Amana RC-1045. Based on everything this far, I will continue to purchase router and CNC bits from SpeTool!

Performed well no issues. Ran whole project using this bit except for end mill bit for cutting it out. Superior performance. Highly recommend this bit. Vcarve in red oak. Clean carve. Spetools you rock again on making another superior bit for my collection Great bit and even better price. Thanks

Good thank you

This bit cuts vert smooth on hardwood without any chipping! I tested this on a piece of hard maple, then next on a walnut box top. It is a fantastic cutter! Very smooth and required no sanding or touchups of any kind!

I love spe tool bits and have several in my collection. Sadly i did not get to use my 1/16 bit. My machine decided to plunge it into my probe block right out of the gate!