Right out of the box it cuts perfectly and leaves a fantastic finish. Make sure to periodically turn the carbide inserts for a longer lasting bit.

This tool cuts great in walnut and maple stock. No burning and is very fast. It leaves a very smooth surface.

For slab or wasteboard flattening on Cnc. Have been happy with the finish I’ve been getting.

The flat bit rips the wood somewhat.

Works fine. Leaves a reasonably smooth milled finish, easy to sand to finished smoothness. Cutters last well and new faces align perfectly, leaving the same reasonably smooth milled finish.

Don't run into that rock that the tree incorporated into its trunk. Wish Amazon sold a rock detector. But the replacement bit worked just as well as the first one. This was a good purchase.

Nice price

Ive only been woodworking for about a year now. I made my first epoxy table and made my own router sled to flatten. The biggest bit I had at the time was 3/4". It worked well but knew if I was going to do it again I needed to upgrade my bit. I have a Bosch 1617 router so I didn't want to go too big. I've used this bit to flatten epoxy tables, walnut and cherry slabs, end grain cutting boards and more. It cuts smooth, leaves a great finish with no tear out or anything and stays sharp. I havn't needed to rotate or replace the blades yet. It works so well I've been considering trying the 2" version. Worth every penny!

I purchased a flattening jig for cutting boards that I am making and needed a flattening bit. Got a much more expensive bit when I purchased the jig and also purchased this SpeTool bit because I new it would be available the next day when I needed it. The SpeTool bit outperformed the much more expensive bit and left a very smooth surface when surfacing endgrain hardwoods. Highly recommended.

Works as it should, no complaints

Very smooth cut at 120 ipm. No burn marks and no sanding required.

I was hesitating to purchase this bit. I'm glad I did. So easy to smooth a surface, I needed to cut only a 1/4 inch out of the top of a circle, did a great job.

I am new to a router sled and didn't know what type of bit to purchase. I purchased two. The first one went dull almost immediately. This bit is wonderful. It is smaller than the first bit I tried but it cut through my walnut plank very well. I like that the individual cutting heads can be turned when they dull to keep your bit sharp. I have not had to turn them yet but feel I will need to when I finish my 8 foot plank.

Good bit works great love that I have multiple uses from one blade

Did exactly what I expected and left a clean surface behind

High quality router bit

I bought it to trim end grain using a trim router. Left a nice surface. Only used once thus far, so I cannot comment on durability. Thus far, I’m happy with the cut and the price, with the former being more important than the latter.

Used this for planing a CNC bed. Worked great.

One blade sits lower. Finish is clean if you feed it slow. Could've had a better price.

At least for the woodworking that I do, I could not ask for better. The blades are super sharp and durable, they can be rotated, which provides for longevity, this thing hogs off material and most importantly it leaves a great finish.

Depending on what Im making, I have even skipped sanding afterwards.

A good budget bit that gets the job done. Works best taking light passes at slower pace.

Used to surface the spoil board on my CNC. Cut quickly and smoothly, leaving a nice clean, flat surface.

Creo que me será muy útil.

I made a sled for my hand held router and this flattening bit worked great. Smoothed and leveled both sides of a 36” diameter table top easily and fast.

It was giving me clean cuts to level a table. It is super sharp though, slipped while attaching and had to tape up a slight wound! Classic user error.

All the other bits I’ve tried resulted in burning and uneven passes, but this bit is sharp and leaves a perfect finish

This thing is a beast! Remarkably better than any surfacing bit I've ever had. Thank you

So worthwhile.