You can make this flattening process buttery smooth if you are equipped with the right tools.
All edges of carbide inserts can be used. Replace the carbide inserts when needed, instead of replacing the whole bit.
2.2mm insert thickness will prevent marring，provide a long using life.
Customers Also Liked
DOWNLOAD CNC SPEED/FEED FILE OR CHECK THE PAGE FEED & SPEED.
If you are unsatisfied for any reason, within 30 days of receipt of your shipment, you may return any new or lightly used item for refund. Please refer to RETURN POLICY for the operation process.
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. SpeTool Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
of any product (including sharpening).
WARNING: Re-grinding of SpeTool products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: SpeTool products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a ubstance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.
CNC Software.tool Files Available
Fusion 360™, Vectric® & Carveco® CNC Tool File For Download, click here!
Frequently Asked Questions?
Provide answers to commonly asked questions
Would this bit work on end grain? I need to machine log blanks for a clocks.
Are there any risk if using this bit on a handheld router? what's the difference between the cnc or router bit?
What do you recommend to flatten with hard wood router?
Where are these made?
très bon travail, surface lisse
Looks like a very well made and sharp bit but ive not used it so far.
Use these daily for planing my jobs flat before engraving! Inserts are easily replaced and don't have to spend time getting them flat and parallel to each other. Never have vibration issues either. Highly recommend for CNC Routing!
Worked really well on my first project and didn't dull. I flattened an endgrain table that is 4x5 feet and it worked as well at the end as at the beginning. And I have three more sides to the cutters when I need them.
Awesome cutter, not sure why I didn't get this guy sooner. Way more affordable in the long run over one time use cutters. Excellent cut quality