FoxAlien [2023 New] CNC Router Machine CL-4x4

• [Industrial Grade Flagship CNC] The CL-4x4 is the flagship CNC machine in the FoxAlien CNC family. It is built with the best industrial-grade hardware components, such as the HG-15 linear bearings on every axis, 16mm ball screws on the XY axis, and 12mm ball screws on the z-axis.

  [Most Powerful Closed Loop Stepper Motors] The CL-4x4 comes with four Nema23(60-100) closed loop steppers. These four stepper motors have up to 3.5Nm torque, which has a 60% improvement when compared to the Vasto XXL and a 10% improvement when compared with the CL-6560.

  [Fast Moving Speed] It is really important to have a fast-moving speed for a full-size CNC machine. Due to the high efficiency of the closed loop motors, the CL-4x4's max moving speed can reach 5000mm/min. This is 2.5 times faster than the Vasto XXL.

  [Largest Working Area & Offline Control] The CL-4x4 has up to 122cm x 122cm x 10cm/ 48” x 48” x 3.94”(XYZ) working area, it can fit standard full-sized sheets without cutting them. Build in a 2.4-inch touchscreen on the controller box. This can control the machine without connecting to a PC.

  [Easy Installation] The CL-4x4 will be shipped with 6 boxes. The main parts are pre-assembled, it just takes 30-45 minutes to assemble the machine, and then you can explore the journey of CNC machining.

Description

The CL-4x4 is the flagship CNC machine in the FoxAlien CNC family. It is built with the best industrial-grade hardware components, such as the HG-15 linear bearings on every axis, 16mm ball screws on the XY axis, 12mm ball screws on the z axis & the most powerful closed loop stepper motors. It has up to 122cm x 122cm x 10cm/ 48” x 48” x 3.94”(XYZ) working area, and it can fit standard full-sized sheets without cutting them.

Specification

• Working Table: T-slot Hybrid Table
• Cutting Area XYZ: 122cm x 122cm x 10cm/ 48” x 48” x 3.94”
• Spindle: 400W
• Router:  Support 65mm and 69 Router, Makita RT0700C and DeWalt DWP611
• X Axis: 16mm Ball Screws & Linear Rails
  
• Y-Axis: 16mm Ball Screws & Linear Rails
  
• Z-Axis: 12mm Ball Screws & Linear Rails
  
• Stepper Motors: Nema23(60-100) Close Loop Stepper Motor
  
• Torque: 3.5Nm
• Independent Driver: DM542
• Machine Structure Material: All Metal

Package List

• 1x CNC router CL-4x4 (half-assembled in 6 boxes)
• 1x T-slot Hybrid Table
  
• 1x Controller
• 2x Set of engraving bits (10pcs/set)
• 1x USB cable
• 1x Power cord
• 1x Box of screws and tools
• 1x User manual
• 52mm & 65mm & 69mm spindle holder