Carrito
Su carrito está vacío
Especificación:
|
numero de flauta |
2 |
|
Diámetro del vástago (SD) |
1/8" |
|
Radio de punta (TR) |
0,25 mm |
|
Longitud de corte (CL) |
15MM |
|
Longitud total (OVL) |
1-1/2" |
|
Grado de un solo lado |
5,12° |
|
Revestimiento |
TiAlN |
| Material | Carburo |
Descripción general:
Especialmente diseñado para perfilado y tallado CNC 2D y 3D en plástico y madera con máquinas CNC. Las puntas de punta esférica de alto corte cortan contornos suaves en 2D y 3D con pasos reducidos.
Se puede utilizar con enrutadores CNC y montados en mesa.
Diseñado para cortar los siguientes materiales:
|
|
|
|
|
|
|
|
|
|
|
|
So far so good. Not really time enough for endurance evaluation. They do what they were designed to do.
Very fine point and good sharpness. Great for engraving and fine detail in wood. It's allowed me to add much greater detail in my carvings without tear out.
Very tiny but strong. They cut some very delicate and detailed work
My first big project. Just took it off the machine. Perfect reproduction, couldnt ask for more or better performance.
I mostly got these for aluminum. They are great. You have to dial in your feeds and speeds, but once you do, you can get some very fine and clean detail. I did snap a couple bits, but that was my fault (and at this price, I'm not too upset). I would gladly buy these again. In fact, I just did
