Cart
Your cart is empty
Specification:
|
Flute number |
2 |
|
Shank Diameter(SD) |
1/4" |
|
Tip Radius (TR) |
1.0MM |
|
Cutting Length(CL) |
1-1/4" |
|
Overall Length(OVL) |
3" |
|
Single Side Degree |
3.92° |
|
Coating |
H-Si |
| Material | Carbide |
Overview:
Specially designed for 2D and 3D CNC profiling and carving in plastic & wood with machines CNC machines. The high-shear ball nose tips cut smooth 2D and 3D contours with reduced stepping.
Can be used with table-mounted and CNC routers.
Designed for cutting the following materials:
|
|
|
|
|
|
|
|
|
|
|
|
If you have done any shopping you know how expensive these tapered ball nose bits can be. These bits appear to be of good quality and very reasonablely priced.
I really like these bits. I use them on my Carvewright system and they last just as long if not longer then the $46 for each bit you get from Carvewright directly. Highly recommended.
They are a little bigger than i was expecting, but they cut like a dream. can not say one bad word about these. I am using them on a CNC router.
These worked great. Cut really good
Works
