SpeTool Compression 1/4" SHK Router Bit 3" Extra Long SPE-X Coated
SpeTool Compression 1/4" SHK Router Bit 3" Extra Long SPE-X Coated
SpeTool Compression 1/4" SHK Router Bit 3" Extra Long SPE-X Coated
SpeTool Compression 1/4" SHK Router Bit 3" Extra Long SPE-X Coated
SpeTool Compression 1/4" SHK Router Bit 3" Extra Long SPE-X Coated
SpeTool Compression 1/4" SHK Router Bit 3" Extra Long SPE-X Coated
SpeTool Compression 1/4" SHK Router Bit 3" Extra Long SPE-X Coated
SpeTool W02011 SPE-X Extra Tool Life Coated SC Espiral de compresión 1/4" de diámetro x 1/4" de vástago x 1-1/4" de longitud de corte x 3" Broca enrutadora de 2 flautas extra larga

SpeTool W02011 SPE-X Extra Tool Life Coated SC Espiral de compresión 1/4" de diámetro x 1/4" de vástago x 1-1/4" de longitud de corte x 3" Broca enrutadora de 2 flautas extra larga

Precio de venta$19.99 USD Precio normal$20.59 USD
Ahorra 3%

Envío calculado en la compra

4 reseñas
4 reseñas
SKU: SPL-D1/4-1/4-U&D-TAC

Extra-long 3″ overall, 1¼″ cut; ¼″ compression spiral pulls fibers inward for splinter-free faces in plywood, MDF and hardwood. Solid-carbide body with SPE-X wear-resistant coating endures high feed rates on CNC or handheld routers. Two flutes clear chips fast, delivering cooler cuts and longer edge life.

42 en existencias
Number Of Item:1
Cantidad:
American Express Apple Pay Google Pay Mastercard PayPal Shop Pay Union Pay Visa
  • Fast Delivery

  • 365-Days Warranty

  • Ships Worldwide


Especificación

Dirección de corte: ARRIBA ABAJO
Diámetro de corte (CD): 1/4"
Diámetro del vástago (SD): 1/4"
Longitud de corte (CL): 1-1/4"
Longitud total (OVL): 3"
Material Carburo


Descripción general

El cortador de compresión consta de una hélice cortada hacia arriba y hacia abajo. La parte superior de la longitud del corte tiene dientes cortantes a la derecha con una espiral a la izquierda. La parte inferior de la longitud del corte tiene dientes de corte derechos con una espiral derecha. Esto crea fuerzas de corte opuestas para estabilizar el proceso de eliminación de material al cortar compuestos en capas para evitar la delaminación, la extracción de fibras y las fresas a lo largo de la superficie. La compresión de la parte superior e inferior de la pieza de trabajo mantiene las capas unidas.

Especialmente diseñado para proporcionar un excelente acabado. Se puede utilizar con enrutadores CNC, de mesa y portátiles.

El nuevo revestimiento de diseño SPE-X podría proporcionar una vida útil hasta 2,5 veces mayor y un filo de corte mucho más suave que otros


Diseñado para cortar los siguientes materiales.

  • MDF/HDF
  • Tablero de espuma
  • Madera dura
  • El plastico
  • Madera blanda
  • Madera contrachapada

Frequently Asked Questions

¼″ cutting & shank diameter, 1 ¼″ cutting length, 3″ overall length, two flutes, solid-carbide body.

Up-cut flutes at the tip lift chips, while down-cut flutes near the shank press fibers down, leaving both faces splinter-free on plywood and laminates.

Users report good results at ≤0.125″ depth and 100 IPM, but caution that long bits exert extra leverage—secure work-holding is essential.

Community tests run 100 IPM at 18 000 RPM with light passes; adjust to keep chips (not dust) ejecting.

Stay under half the bit diameter (~0.12″) or plunge beyond 3⁄16″ so both up- and down-cut zones engage for a clean edge.

SpeTool’s SPE-X coat resists heat and oxidation, extending edge life up to 2.5 × longer than uncoated carbide.

Reviewers report “crazy sharp, cuts like butter” and “excellent finish on top and bottom,” confirming minimal tear-out.

341 global reviews average 4.6/5 ★; owners praise sharp edges, noting longevity matches pricier brands when used with proper feeds.

Yes—just use shallow passes to control torque and keep the base flat on the jig.

SpeTool lists a 365-day warranty on its store and Amazon provides a 30-day no-question return.

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
A
AMVolk
Compression bit works for single bit cutting

I needed to cut out a lot of pieces from 1/2" plywood. To get the least tear out, you normally have to use a down cut bit for the top surface, and then finish with an up cut bit for the bottom. Changing bits is very time consuming, so I thought I would try a compression bit to get the best of both worlds with one bit. While it is not as good as the two bit system it is quite acceptable for my project.

W
WWApprentice
Satisfecho con la compra!

Las brocas Spetool son super afiladas y cumplen a cabalidad su cometido. Aún no me atrevo a opinar sobre su durabilidad, pero considerando mi experiencia hasta el momento la recomendaría sin pensarlo dos veces.

R
Rob C.
Great tool for the price

I used this for use on cherry wood and it left perfect edges which didn’t require much sanding at all.

B
Brandon
Another quality bit from SpeTool

I have purchased several SpeTool bits and they never seem to disappoint. Great value for a great price.

ChangedLog

    Last updated: 2025-06-13