π Itβs not strictly required for small jobs, but it can be very helpful. When CNC routing aluminum or brass, many people use a little bit of lubricant to keep the cutter cool and to prevent chips from sticking. For example, a quick spray of WD-40 along the toolpath or a mist of a light oil can dramatically improve results β youβll get cleaner cuts and extend bit life. If you have a misting setup (like FogBuster or similar), thatβs ideal for continuous work. For plastics, you generally **do not** use liquid coolant (itβs usually cut dry or with an air blast), since plastics donβt need it beyond what the O-flute can handle. If youβre attempting harder metals (some do try mild steel on very rigid machines), coolant becomes more important β but cutting steel on a typical router is pushing it. Summing up: for aluminum, a little lubricant is recommended but not absolutely mandatory if you have good chip clearing; for plastics, dry with air blast is fine; for woods, no coolant obviously. SpeTool bits are carbide, so they handle heat better than HSS, but lubrication can still make a big difference in metal cutting.
Related product: β View product page
