DOWNLOAD CNC SPEED/FEED FILE OR CHECK THE PAGE FEED & SPEED.
If you are unsatisfied for any reason, within 30 days of receipt of your shipment, you may return any new or lightly used item for refund. Please refer to RETURN POLICY for the operation process.
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. SpeTool Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
of any product (including sharpening).
WARNING: Re-grinding of SpeTool products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: SpeTool products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a ubstance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.
CNC Software.tool Files Available
Fusion 360™, Vectric® & Carveco® CNC Tool File For Download, click here!
Customers Also Liked
Frequently Asked Questions?
Provide answers to commonly asked questions
What payment terms you can accept?
How secure is my online order?
I have used these bit’s quite a lot especially the end mills and have had no issues, they’re still sharp and cutting well, nice set of bits for the price
I have bought the down cut but before and it worked great. Lasted a good amount of time. So this time I ordered this four pack. The v bit and the taper bit look great. But the up cut and down cut. Are not flat on the bottom. I think the upcut will be fine but Im not sure about the down cut. I think they might head up when plunging into my work pieces on my CNC.
I've carved quite a few signs with these now, primarily using the thinnest bit. It still seems nice and sharp and cuts well.