Specification
Cutting Direction: |
UP & DOWN |
Cutting Diameter(CD): |
7/8" |
Shank Diameter(SD): |
1/2" |
Cutting Length(CL): |
1-3/16" |
Overall Length(OVL): |
3-3/4" |
Material |
Carbide |
Overview
●Unique Design: The Ultra-Performance pattern router bit design with top and bottom bearings, Compression cut prevents fraying and splintering, left perfect edges
●Industrial Quality: The flush cut router bit is made of premium carbide according to stringent Industrial grade quality standards providing tough, resistant wear and high cutting performance.
●Sharp Efficient: The template router bit is sharper and stays sharp longer than conventional flush-trim router bits. Provide better chip evacuation, less heat buildup, and cleaner edges.
●Wide Application: This flush trim bit can be used for any flush trim situation and is an excellent choice for pattern or template work
Designed for cutting the following materials
Safety Guidelines
BE CAREFUL. Always wear eye and ear protection along with dust masks. Avoid using bits while in loose clothing. Keep hands, body, clothing and hair away from the cutter. Do not remove safety guards, and be sure to always feed against the cutter rotation. Never use dull or damaged cutters. Disconnect power when changing bits or making adjustments, and always leave the power disconnected when not in use. Follow all safety recommendations of the power tool manufacturer. SpeTool Company assumes no responsibility for defects, damage, or injury (direct or indirect) caused by misuse, abuse, alteration or modification
of any product (including sharpening).
WARNING: Re-grinding of SpeTool products will produce dust of potentially hazardous ingredients. Always read and follow owner’s safety manual of all power machinery before using bits. Always use eye protection while using this or any carbide cutting product.
WARNING: SpeTool products can expose you to chemicals including lead and/or cobalt, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to http://www.P65Warnings.ca.gov.
WARNING: Drilling, sanding or machining wood products can expose you to wood dust, a ubstance known to the State of California to cause cancer. Avoid inhaling wood dust or use a mask or other safeguards for personal protection. For more information go to http://www.P65Warnings.ca.gov.