SpeTool V Bits SPE-X Coated
END MILL

[WEEKLY TECH TIPS] What are chamfer and V-groove router cutters?

These router cutters have V-shaped bodies of different angles. They're designed to produce V-shaped grooves, chamfers, and bevels for a wide range of applications. Design Flutes: Chamfe...
V Groove Bit 4 flutes SpeTool
END MILL

[WEEKLY TECH TIPS] What is the difference between V-Groove and V-bits?

CNC V-Bits are single flute bits with one cutting edge. They are designed to be most efficient in fine detail engraving in hardwood, aluminum, brass, copper, etc. Commonly used in the engraving in...
SpeTool Flush Trim Router Bit
END MILL

[WEEKLY TECH TIPS] A Beginners Guide to Choosing the Best Flush Trim Router Bits?

Flush-Trim Router Bits as the name suggests these bits are used to trim the edge of one material flush with the edge of another– for example, trimming a veneered surface flush with a substrate or...
How Does A SpeTool Flush Trim bit Making Copies?
Flush Trim Router Bit

[WEEKLY TECH TIPS] How Does A Flush Trim bit Making Copies?

Flush trim router bit allows you to duplicate a master pattern or template. You can use it to create exactly the same shape multiple times over with similar pieces of timber. How does it work? ...
SpeTool Flush bearing trim router bit
DIFFERENCE BETWEEN UPCUT AND DOWNCUT

[WEEKLY TECH TIPS] What is the difference between an upcut and a downcut flush trim bit?

The spiral bits originated in milling and CNC work, where the bit was kept on top of the work as if it would be used on a handheld router. This means that an upcut bit will pull work towards the r...
Router bit

[WEEKLY TECH TIPS] How to Use a Spoilboard Cutter?

How to Use a Spoilboard Cutter? Once you’ve chosen a good cutter for your CNC Router, the next question would be how to use one properly. SpeTool Flattening Planer Router Bit Your first an...
SpeTool Router bit end mill o flute
END MILL

[WEEKLY TECH TIPS] WHEN DO I USE AN O FLUTE BIT?

What is an O flute bit? The O flute bit is a carbide spiral flute with a unique mirror finish, resulting in high-quality surface finishes, clean professional cuts, and prolonged tool life. How does...
Router bit

[WEEKLY TECH TIPS] USING THE RIGHT SPEEDS AND FEEDS

Feeds And Speeds ‘Feeds and speeds’ is generally used to refer to ‘feed rate’, ‘slew rate’, ‘plunge rate’ and ‘spindle rpm’. The feed rate represents how fast the machine will move the router bit t...
HOW TO USE A COMPRESSION BIT
Compression router bit

[WEEKLY TECH TIPS] HOW TO USE A COMPRESSION BIT

A compression bit is the combination of both up-cut and down-cut spirals.  A dedicated up or downward spiral may only give a good finish on one side of the material if the material is laminated. Wh...